• Universal joint (0,7Mb)

Other link

• Download Couplings CAD

High precision universal joint, according to DIN 808/7551. Each execution consists of 2 cubes with forks and a central block.

Between pins and bores there are:

• P series: 4 bearings with solid pins
• E series: with sliding bushes
• H series: with needle roller bearings

Holes for lubrication are located in the center blocks of the P and E series.

The H series (high speed applications) does not require lubrication as the roller bearing is maintenance free.

P series joints are designed for high precision and long life applications.

Each set can be supplied with an extendable shaft.

Universal joint available executions

P-series universal joint with high-precision, high-wear solid bearings and pins . According to DIN 808 standard.

Extendable universal joints in 2 versions:

• Type “E” according to DIN 808
• Type “EB“ according to DIN 808/7551
• Type “ER“ with quick change

Type “H” with needle bearings, available in 2 versions:

• Type “H” according to DIN 808
• Type “HB” according to DIN 808/7551Type R“ with quick change

Stainless steel universal joints. .

Maximum temperature 200 °C According to DIN 808.

We can supply custom gaskets with turning, milling, internal and/or external drilling, special lengths and tolerances on request. For information, contact our technical department.

Protective sleeves in special neoprene rubber.

Resistant to acids, oils, greases, dust and humidity.
By filling it with grease, it ensures a constant lubrication.

L'articolo Universal Joints proviene da Dinámica.

• Asahi^® Ball Bearings (7,4Mb)

DINAMICA offers a wide range of self-aligning bearing housings and ball joints. Housings available in different materials: cast iron, stamped sheet metal, zinc-plated, and stainless steel. ASAHI® housings made in Japan are used in various application areas. The housings incorporate a unique locking pin that ensures smooth self-alignment and prevents outer ring rotation, thus increasing wear life.

The range is one of the largest in the world and includes cast iron, stainless steel and stamped sheet metal bodies.

Types are available designed for the insertion of a protective cap and for high temperature applications and very high radial loads.

Features

• Wide load range
• Ball bearing extremely long operating life
• Very good ball bearing protection (double seal)
• High mechanical resistance
• Easy and secure lock on the shaft
• Local temper on sliding ball rail
• System that prevents the rotation of the inner ring of the ball bearing on the shaft
• Easy positioning during assembly

ASAHI® ball bearing units and connecting rod ends are available with bronze, teflon or steel-on-steel inserts

Bearing Units and Rod Ends ASAHI^®

High machining quality and precision ensure maximum reliability and durability in any application, including the most severe. For shaft diameters between Ø 12 and Ø 140 mm.

A huge range of versions with cast bodies for generic applications.

It can be supplied with ball bearings:

• UC Type – standard
• UK Type – with bush fitting
• Type B – with lifelong lubrication

Version with stamped and galvanized sheet metal for economical and low load applications.

For shaft diameters between Ø 12 and Ø 35 mm. available with type B ball bearings with lubrication for life for generic applications. Stainless steel versions ideal for applications in the food and packaging sector where very aggressive environments and high humidity can be found, due to their excellent resistance to corrosion.

It can be supplied with FDA standard grease. For shaft diameters between Ø 12 and Ø 50 mm.

With MUC type ball bearings, these bearing units are made entirely of stainless steel and withstand a wide range of operating temperatures from -20°C to +120°C. Manufactured with a special zinc alloy body and AISI 304 stainless steel bearings, designed for use in potentially corrosive applications, they combine maximum lightness with fast and precise assembly. Suitable to work at temperatures between -10 ° c and + 80 ° c.

Very compact dimensions, for shaft diameters between Ø 10 and Ø 30 mm.
Ball joints and connecting rods are terminated with brass, Teflon, or steel-on-steel inserts. 90 degree steel-on-steel and steel-on-aluminum ball joints. Welding tips for hydraulic cylinders.

Features

• High safety
• Self -alignment
• High misalignment angle
• High allowable load
• Long operating life

L'articolo Bearing Units and Rod Ends ASAHI® proviene da Dinámica.